Valve Test Adapters

Valve Test Adapters: Set of three sizes: 7/8", 1/2", and 5/8" - used to insert into the valve tester stand which is 3/4".

Valve Test Adapters:  in three sizes: 7/8", 1/2", or 5/8" - used to insert into the valve tester stand which is 3/4".

Not all valves are sized the same. These adapters fit into the Valve Tester so that you can test ALL valves (Oxygen, SCBA, high pressure, low pressure) before repairing them.

Customers who bought this item also bought

O-Ring Gland Cleaning Tool

The O-ring gland cleaning tool is designed to clean the O-ring gland area on the cylinder to ensure proper sealing between the O-ring and the valve.Tool authorized for use by cylinder manufacturers. Retooling can restore cylinders lost to O-Ring gland corrosion. Replaceable abrasive disks.

Optical Plus

Made by AIT, the OPTICALPLUS has the highest magnification (4X), clarity and lighting capability available---surpassing anything you have used in the past.

Sanding Discs

Replacement sanding discs for TL101 (O-Ring Gland Cleaning Tool). 10 sets.

Wire Brush

To aid in a thorough inspection, the threads need to be clean. Corrosion, dirt and debris can hinder a good visual inspection. This 1" wire brush aids in cleaning of threads and corrosion of the O-ring gland area of the 3/4 inch valve openings.